Wire EDM (Electrical Discharge Machining)
- Charmilles Robofil 510 Wire EDM
- Machining Envelope: 47.2" X, 27.5" Y, 15.7" Z, 4000 lbs
- Glass scales accurate to 0.5 micron (20 micro-inch)
- 20°C Tempurature controlled dielectric, and environment
- Fully featured Opticam Wire EDM CAM software
- Different upper and lower head contours (ruled surfaces), etc from solid models
- 0.010" diameter wire standard, other diameters available on request
- Zero cutting force allows tiny or thin part shapes
- Tolerances to within 0.0006" are easily held, tighter tolerances are possible as needed
- Charmilles HD-30 CNC EDM Drill
- Drills through hardened steels and carbide
- Drills at any contact angle with no starter drill or flat required
- Drills through ball bearings for example
- Electrode sizes from 3mm to 0.3mm
- Used to make starter holes for Wire EDM processing
- Charmilles Roboform 20 4 Axis CNC Sinker EDM
- Graphite or Copper electordes made in house and verified on our Mitutoyo C574 CNC CMM
- Threads in hardened materials Steels and Carbide
- Blind depth internal shapes with sharp corners such as hex or squares
- Any conductive material including hardened steels, carbide, copper, aluminum, exotic alloys monel 400, inconel, kovar, etc.
EDM Small Hole Drilling / Hole Popper
4 Axis CNC Die Sinker EDM
Materials:
